Wavecom W74PC User Manual

320

Additional Functions WAVECOM Decoder W74PC, W-PCI/e, W-CODE, W-CLOUD Manual V9.1.0
If the server is stopped, you CANNOT restart it using Restart. You must click Exit, and then go to Start |
Programs | WAVECOM | WXXX | WavecomServerControl to restart the server.
WAVECOM Server Control
After restart of the server, the WAVECOM Server Control screen is displayed.
Card Information
Card information is available from the Card Information tab:
 Card names
 Number of connections to the card, including local and remote connections
 Device name
 Card serial number
Setting Up Card Names
A maximum of eight cards may be connected to a single computer. Each of these cards has a name asso-
ciated with it; the card names can be used to establish a connection to a specific card. The default names
are "DeviceA" through to "DeviceH". It is possible to change the card names by:
 Clicking into the name edit field
 Change the name of the card
 Click on the Apply Changes button. Discard Changes will discard any changes

Wavecom W74PC Specifications

General

Brand	Wavecom
Model	W74PC
Category	Media Converter
Language	English