Welch Allyn Connex Spot Monitor Service Manual

1. In Advanced settings, touch the Network > Radio tabs.
2. Specify settings.
Setting Action/Description
Enable radio Enable the radio for WiFi communications. When
disabled, the radio is not available.
ESSID Enter the service set identifier (SSID) for the enterprise.
Enter a maximum of 16 characters.
Radio mode Select the radio band.
Dynamic Frequency Selection Enable to allow the site to transmit data on changing
frequencies for added security. This option applies most
frequently to military or government enterprises.
Enable radio network alarms Activate radio network alarms when an wireless dropout
alarm condition occurs. When disabled, radio network
alarms are not available.
Roaming Select the type of roaming (only available with WPA/
WPA2 Enterprise).
Regulatory Display the WiFi regulatory certification information.
Update radio Touch Update radio to activate all new radio
settings not selected previously.
Touch OK in the confirmation popup.
Note None of the changed radio settings
take effect until you touch Update radio.
3. Do one of the following:
• To continue in Advanced settings, touch another tab.
• To exit Advanced settings and return to the Home tab, touch Exit.
Specify security settings
1. In Advanced settings, touch the Network > Security tabs.
2. Select the encryption method to secure data transfer from the device.
Note Network server certificates are required for all EAP security
options. Use the Welch Allyn Service Tool to load these
certificates.
3. Specify settings.
Setting Action/Description
Authentication type Select the preferred encryption option. Then specify any
additional settings that appear. The default is Open or
no encryption.
WEP 64 Select a WEP key and then enter a 10-character key in
the selected field. Repeat this process to create multiple
WEP keys. Then click Update radio.
WEP 128 Select a WEP key and then enter a 10-character key in
the selected field. Repeat this process to create multiple
WEP keys. Then click Update radio.
WPA-Personal and WPA2-Personal Enter a Passphrase (8 to 63 characters). The characters
you enter appear as asterisks. Then click Update
radio.
Service manual Advanced settings 27

Welch Allyn Connex Spot Monitor Specifications

General

Brand	Welch Allyn
Model	Connex Spot Monitor
Category	Medical Equipment
Language	English