Xerox 2400 Series User Manual

Xerox Scanner User’s Guide 107
Scanning from the TWAIN Interface
The TWAIN Interface opens.
11. Click the Scan button on the TWAIN interface.
Scanning begins and the Setup Wizard runs the scan test.
Then a window opens that says “Basic scan test passed.”
If the scanned image does not appear in the window, click
Missing Image. A window will open for you to retry the scan.
Click Next, then insert the page and click the Scan button on
the TWAIN interface again.
12. Click Next on the “Basic scan test passed” window.
NOTE: If you are setting up PaperPort for the WIA scanning
option, the WIA interface opens instead.

Xerox 2400 Series Specifications

General

Brand	Xerox
Model	2400 Series
Category	Scanner
Language	English