Xerox Scanner User’s Guide 31
Scanning
Positioning a 35mm Negative in Its Mask
1. Slide the filmstrip into the 35mm negative mask and center the
frame you want to scan in the opening.
2. Position that mask on the glass and align the arrow at the
corner of the mask with the arrow on the scanner body. Make
sure the text on the mask faces up.
The 35mm negative holder also has a calibration slot next to it.
Do not place items to be scanned in the calibration slot.
3. Close the lid. You’re now ready to start scanning the slides.
4. See “Scanning a 35mm Slide or Negative from the TWAIN
Interface” on page 32 to start the scanning.
To Next Page
Loading...
Need help?
General