ID Card Copy
IIDD CCaarrdd CCooppyy OOvveerrvviieeww
You can use the ID Card Copy App to copy both sides of an ID card or small
document onto one side of paper. To copy the card properly, place each side
in the upper-left corner of the document glass. The printer stores both sides
of the document, then prints them side by side on the paper.
The ID Card Copy App is hidden from view on initial device setup. For details about configuring and
customizing the Apps, refer to the System Administrator Guide at www.xerox.com/office/
ALB81XXdocs.
For information about all the App features and available settings, refer to Apps Features.
CCooppyyiinngg aann IIDD CCaarrdd
To copy an ID card:
1. Lift the document feeder, then place the original document in the upper-left corner of the
document glass.
2. At the printer control panel, press the Home button.
3. Touch ID Card Copy.
4. To clear previous App settings, touch Reset.
5. Adjust the settings as required.
6. Touch Scan Front.
7. When scanning is finished, lift the document feeder. Place the second side of the original
document in the upper-left corner of the document glass.
8. To scan the second side of the original document and print the copies, touch Scan Back.
9. To return to the home screen, press the Home button.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
101
Xerox® Apps
To Next Page
Loading...
Need help?
General
