4. Close the tray.
5. At the control panel, select the correct paper size, type, and color. Ensure that the paper type is
set to Envelope.
6. To confirm the settings, touch Confirm.
LLaabbeellss
You can print labels from the following trays only:
• Trays 1–4
WARNING: Printing labels from the following trays can cause misfeeds and other print
problems:
• Tray 5 - Bypass Tray
• Tray 6 - High Capacity Feeder
GGuuiiddeelliinneess ffoorr PPrriinnttiinngg LLaabbeellss
• Use labels designed for laser printing.
• Do not use vinyl labels.
• Do not feed a sheet of labels through the printer more than once.
• Do not use dry gum labels.
• Print only on one side of the sheet of labels. Use full sheet labels only.
• Store unused labels flat in their original packaging. Leave the sheets of labels inside the original
packaging until ready to use. Return any unused sheets of labels to the original packaging and
reseal it.
• Do not store labels in extremely dry or humid conditions or extremely hot or cold conditions.
Storing them in extreme conditions can cause print-quality problems or cause them to jam in the
printer.
• Rotate stock frequently. Long periods of storage in extreme conditions can cause labels to curl and
jam in the printer.
• In the print driver software, select Label as the paper type.
• Before loading labels, remove all other paper from the tray.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
205
Paper and Media
To Next Page
Loading...
Need help?
General
