SSeennddiinngg aa SSeerrvveerr FFaaxx
If a fax server is connected to the network, you can send a document to a fax machine without
requiring a dedicated telephone line.
When you use the server fax, a document is scanned and sent to a fax repository on the network. The
fax server sends the fax over a telephone line to a fax machine.
Before you can use the server fax, the system administrator is required to enable the server fax app
and configure a fax repository or filing location.
To send a server fax:
1. Load your original documents.
• For single pages or paper that cannot be fed using the duplex automatic document feeder,
use the document glass. Lift the duplex automatic document feeder, then place the original
document face down in the upper-left corner of the document glass.
• For multiple, single, or 2-sided pages, use the duplex automatic document feeder. Remove any
staples and paper clips from the pages. Insert the original documents face up in the duplex
automatic document feeder, with the top of the page entering the feeder first. Adjust the
paper guides so that they fit against the original documents.
Note: When the original documents are detected, the automatic document feeder
confirmation indicator LED illuminates.
136
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Xerox® Apps
To Next Page
Loading...
Need help?
General
