CClleeaanniinngg tthhee PPrriinntteerr IInntteerriioorr
CClleeaanniinngg tthhee PPrriinntthheeaadd LLeennss
The printhead lens requires regular cleaning to maintain print quality. Clean the printhead lens every
time the associated drum cartridge is replaced, or if print quality starts to degrade. For example, if
prints have voids or light streaks, use the following instructions to clean the LED lens:
WARNING: If you accidentally get toner on your clothes, lightly dust them off as best as you
can. If some toner remains on your clothes, use cool water, not hot, to rinse off the toner. If
toner gets on your skin, wash it off with cool water and a mild soap. If you get toner in your
eyes, wash it out immediately with cool water and consult a doctor.
Caution: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the printer.
2. Remove the waste toner transport unit:
a. To unlock the waste toner transport unit, rotate the locking lever 45 degrees
counterclockwise.
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
221
Maintenance
To Next Page
Loading...
Need help?
General
