Initial Printer Setup
Before installing the printer software, verify that the printer is set up correctly. Setup includes
enabling the optional features and assigning an IP address for the Ethernet network connection.
Printer settings can be configured at the printer control panel or by using the Embedded Web Server.
To configure settings at the printer control panel, the Installation wizard starts the first time that you
power on the printer. The wizard prompts you with a series of questions to help configure basic
printer settings.
The System Administrator can configure the following settings:
• Language
• Network Connection
• Proxy Server Setup
• Date and Time
• Measurements
• LDAP Settings
• Apps Setup
• Security Settings
For more information on configuring the printer settings at the control panel or using the Embedded
Web Server, refer to the System Administrator Guide at www.xerox.com/office/ALB81XXdocs.
58
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Getting Started
To Next Page
Loading...
Need help?
General
