EEmmppttyyiinngg tthhee HHoollee PPuunncchh WWaassttee CCoonnttaaiinneerr iinn tthhee BBuussiinneessss RReeaaddyy
FFiinniisshheerr
Caution: Do not perform this procedure when the printer is copying or printing.
1. Open the front door of the Business Ready Finisher.
2. Remove the hole punch waste container from its slot near the top left of the finisher.
Note:
• When you remove the hole punch waste container, wait 10 seconds before you reinsert
it into the printer. The hole punch counter resets after 10 seconds.
• If you remove the hole punch waste container before the device instructs you to, empty
the container before you reinsert it into the finisher.
3. Empty the container.
262
Xerox
®
AltaLink
®
B81XX Series Multifunction Printer
User Guide
Maintenance
To Next Page
Loading...
Need help?
General
