HTTP
Hypertext Transfer Protocol (HTTP) is a request-response standard protocol between clients and
servers. Clients that make HTTP requests are called User Agents (UAs). Servers that respond to these
requests for resources, such as HTML pages, are called Origin Servers. There can be any number of
intermediaries, such as tunnels, proxies, or gateways between User Agents and Origin Servers.
EEnnaabblliinngg HHTTTTPP aatt tthhee PPrriinntteerr CCoonnttrrooll PPaanneell
1. At the printer control panel, press the Machine Status button.
2. Touch Network Settings→Advanced Settings.
3. Touch HTTP Setting.
4. Touch Enable, then touch OK.
CCoonnffiigguurriinngg HHTTTTPP SSeettttiinnggss iinn XXeerrooxx
®®
CCeennttrreeWWaarree
®®
IInntteerrnneett SSeerrvviicceess
1. In Xerox
®
CentreWare
®
Internet Services, click Properties→Connectivity→Protocols.
2. Click HTTP.
3. To enable the protocol, for Protocol, click Enable.
4. For Keep Alive Timeout, enter the time that the printer waits for a response from a connected
user before it terminates the connection.
Note: Increasing the Keep Alive Timeout can cause connections to slow down.
5. Change the Port Number as needed.
Note: If a Machine Digital Certificate is configured, you can edit the following fields.
6. For HTTP Security Mode, select a security option.
Note: To allow connections to the Xerox device using HTTPS only, select Require HTTPS.
7. To enable one or more TLS versions, for TLSv 1.0, TLSv 1.1, or TLSv 1.2, select Enable.
8. Click Apply.
32
Xerox
®
B1025 Multifunction Printer
System Administrator Guide
Network Connectivity
To Next Page
Loading...
Need help?
General
Weight and Dimensions
