DocuMate 262i Scanner User’s Guide 57
Scanning
Configure Before Scan
Choosing Configure Before Scan simply opens a scanning interface when
you press or click a scan button. You can then use the interface to change
the Resolution, Scan Mode, and other settings. When you scan, the
scanned image will still be sent as the file type and to the same
Destination Application already selected in the One Touch Properties
window for that button.
To configure before scanning:
1. Open the One Touch Properties window.
2. Using the arrows, choose the button that you want to set to configure
before scanning.
3. Select the scan configuration Configure Before Scan.
4. Right-click on Configure Before Scan and choose an interface to
use for scanning.
TWAIN—The TWAIN Interface opens for you to make changes prior
to scanning. See “Accessing the TWAIN Interface” on page 75.
WIA—The Windows Image Acquisition Interface (WIA) opens for you
to make changes prior to scanning (available for Windows XP and
Windows Vista only). See “Scanning with the WIA Interface” on
page 80.
5. Click OK or Apply on the One Touch Properties window.
Click the arrows to
select the button.
Select Configure
Before Scan.
Right-click on
Configure Before
Scan to get the menu,
and choose the
interface to use for
configuring.
To Next Page
Loading...
Need help?
General