DocuMate 262i Scanner User’s Guide 19
Scanning
Load and Scan Documents from the Input Tray
When you press either the Simplex or Duplex button, documents are
scanned using the scan settings indicated by the LED number. The
scanned images are then sent to a software application (known as the
Destination Application) on your computer.
1. Adjust the paper guide for the width of paper, and make sure the input
and output trays are fully extended.
2. Load the documents face down with their tops into the Automatic
Document Feeder.
NOTE: Always remove any staples or paper clips from documents
before inserting them into the scanner’s Automatic Document Feeder.
Staples and paper clips can jam the feed mechanism and scratch the
internal components. Also remove any labels, stickers, or Post-It™
notes that may come off during the scanning process and get stuck in
the scanner. Misuse as described here will void your scanner’s
warranty.
If you are using the Front Feed with Output
Tray, make sure the front feeder is up to
feed pages out underneath the tray.
To Next Page
Loading...
Need help?
General