Xerox DocuMate 3125 User Manual

Xerox DocuMate 3125
User’s Guide
131
Scanning
1. Load the document(s) in the scanner.
2. Adjust the settings in the interface for the item you are scanning.
3. Click on the Scan button.
4. When scanning is complete, click Cancel to close the interface.
5. The scanned images are now in the scanning application.
Note: if you see this locked version of the scanner’s interface, please click on this link for Driver Settings to go to the
instructions in this guide to turn off the option to lock the settings for the scanner interface. De-select the option
Lock settings under the General settings for the driver options.

Xerox DocuMate 3125 Specifications

General

Grayscale levels	8
Maximum scan area (ADF)	216 x 965 mm
Minimum scan area (ADF)	51 x 74 mm
Cables included	AC, USB
Built-in display	No
USB port	Yes
USB version	2.0