Xerox DocuMate 3125 User Manual

Xerox DocuMate 3125
User’s Guide
40
Scanning Interfaces
If you selected the recommended installation, then you have several different options to scan with your Xerox
DocuMate 3125 scanner. Each method scans equally well, so use the one with appropriate options for the item you
are scanning.
• One Touch—When you press the Simplex or Duplex button on the scanner, the scanner starts scanning using
the settings for the current LED number. The scanned image is then sent to a destination on your computer or
network drive.
• One Touch Button Panel—Use this scan option when you want to scan from the computer screen. Scanning
from the on-screen One Touch Button Panel is the same as selecting a scanning option on the scanner, except
you click an icon that represents the function.
• TWAIN Interface—This option uses your scanner’s TWAIN interface to scan. Select scanning options before
scanning, put the document in the scanner, then click the Scan button in the TWAIN interface window.
• ISIS Interface—This option uses the ISIS interface for scanning. Select the ISIS scan settings, put the
document in the scanner, then click the Preview Scan button in the ISIS window.

Xerox DocuMate 3125 Specifications

General

Grayscale levels	8
Maximum scan area (ADF)	216 x 965 mm
Minimum scan area (ADF)	51 x 74 mm
Cables included	AC, USB
Built-in display	No
USB port	Yes
USB version	2.0