3.7 Printing After Checking the Print Result - Sample Print - 65
Operations on the Control Panel
The following explains how to print or delete a Sample Print job depending on its print result.
Note
• If the menu screen is left idle for 3 minutes, the display returns to the print screen. Any incomplete
setting on the menu screen made 3 minutes before becomes invalid.
1. Press the < > button on the control panel.
2. Press the < > button until [Sample Print] is
displayed.
3. Press the < > button to accept the
selection.
A user ID is displayed.
4. Press the < > button until the desired user
ID is displayed.
Note
• The user ID is the ID set under [User ID] in the
[Sample Print] dialog box on your print driver.
5. Press the < > button to accept the
selection.
A document stored in the printer is
displayed.
6. Press the < > button until the desired
document name is displayed.
Note
• The document name is the name (of up to 12 bytes)
set under [Document Name] in the [Sample Print]
dialog box on your print driver.
• When more than one document is stored in the printer,
you can also select [All documents].
7. Press the < > button to accept the
selection.
A screen that allows you to set whether to
delete or save the document after printing it
is displayed.
Note
• If you want to delete the document without printing,
press the < > button, display [Delete], press the
< >, and then press the <Eject/Set> button.
• If you want to save the document in the hard disk after
printing, press the < > button, display [Print and
Save], and proceed to Step 8.
Print Menu
Secure Print
Print Menu
Sample Print
Select User ID
User1
Select Document
Report
1. Report
Print and Delete
To Next Page
Loading...
Need help?
General