DDaattee aanndd TTiimmee AArree IInnccoorrrreecctt
Probable Causes Solutions
The Date and Time Setup is set to Manual (NTP
Disabled).
To change the Date and Time to Automatic, in the
Embedded Web Server, enable NTP. For details, refer
to the System Administrator Guide at www.support.
xerox.com.
The time zone, date, or time is set incorrectly. Set the time zone, date, and time manually. For
details, refer to the System Administrator Guide at
www.support.xerox.com.
SSccaannnneerr EErrrroorrss
Probable Causes Solutions
Scanner is not communicating. Power off the printer, and check the scanner cable.
Wait two minutes and power on the printer again.
If the problem is not resolved, contact your Xerox
®
service representative.
256
Xerox
®
EC8036/EC8056 Color Multifunction Printer
User Guide
Troubleshooting
To Next Page
Loading...
Need help?
General
