Xerox Phaser 6120 User Manual

User Safety Summary
151
User Safety Summary
Your printer and the recommended supplies have been designed and tested
to meet strict safety requirements. Attention to the following information
ensures the continued safe operation of your printer.
Electrical Safety
 Use the power cord supplied with your printer.
 Plug the power cord directly into a properly grounded electrical outlet.
Make sure each end of the cord is securely connected. If you do not know
if an outlet is grounded, ask an electrician to check the outlet.
 Do not use a ground adapter plug to connect the printer to an electrical
outlet that does not have a ground connection terminal.
 Do not use an extension cord or power strip.
 Verify that the printer is plugged into an outlet that is capable of providing
the correct voltage and power. Review the printer’s electrical specification
with an electrician if necessary.
WARNING!
Avoid the potential of electrical shock by ensuring that the printer is properly
grounded. Electrical products may be hazardous if misused.
 Do not place the printer in an area where people might step on the power
cord.
 Do not place objects on the power cord.
 Do not block the ventilation openings. These openings are provided to
prevent overheating of the printer.
 Do not drop paper clips or staples into the printer.
WARNING!
Do not push objects into slots or openings on the printer. Making contact with
a voltage point or shorting out a part could result in fire or electrical shock.
If you notice unusual noises or odors:
1 Turn off the printer immediately.
2 Disconnect the power cord from the electrical outlet.
3 Call an authorized service representative to correct the problem.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm