Xerox Phaser 6120 User Manual

Media Types46
Media Types
Before purchasing a large quantity of special media, do a trial print with the
same media and check the print quality.
Keep media on a flat, level surface in its original wrapper until it is time to
load
it. For information about recommended paper and specialty media, see
the Recommended Media List at www.xerox.com/office/6120support.
Plain Paper
Use plain paper that is
 Suitable for laser printers, such as standard or recycled office paper.
CAUTION
Do not use the media types listed below. These could cause poor print
quality, paper jams, or cause damage to the printer.
DO NOT use media that is
 Coated with a processed surface (such as carbon paper, digitally gloss-
coated media, and colored paper that has been treated)
 Carbon backed
 Iron-on transfer media (such as heat-sensitive paper, heat-pressure
paper, and heat-press transfer paper)
 Cold-water-transfer paper
 Pressure sensitive
 Designed specifically for inkjet printers (such as superfine paper, glossy
film, and postcards)
 Already been printed on by another printer, copier, or fax machine
 Dusty
 Wet (or damp)
Capacity Tray 1 Up to 200 sheets, depending on the
paper weight
Tray 2 Up to 500 sheets, depending on the
paper weight
Orientation Face up
Driver Media Type Plain paper
Weight 60 to 90 g/m² (16 to 24 lb. bond)
Duplexing See page 45 for supported sizes.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm