Xerox Phaser 6120 User Manual

About the Control Panel30
PRINTABLE PAGES MENU
With this menu, printer information, such as the configuration page and the
demo page, can be printed.
" All factory default values are shown in bold.
MENU MAP
Settings
YES/NO
Prints the menu map.
CONFIGURATION
Settings
YES/NO
Prints the configuration page.
SUPPLIES PAGE
Settings
YES/NO
Prints the statistics page such as the number of pages printed.
FONT LIST POSTSCRIPT
Settings
YES/NO
Prints the PostScript font list.
PCL
Settings
YES/NO
Prints the PCL font list.
DIRECTORY
LIST
Settings
YES/NO
Prints the directory list of the hard disk and flash.
" If the hard disk drive is not installed, only the flash
directory list is printed.
DEMO PAGE
Settings
YES/NO
Prints the demo page.

Xerox Phaser 6120 Specifications

General

Color	Yes
Print technology	Laser
Time to first page (black, normal)	13 s
Time to first page (color, normal)	22 s
Print speed (black, normal quality, A4/US Letter)	20 ppm
Print speed (color, normal quality, A4/US Letter)	5 ppm
Internal memory	128 MB
Processor model	300 MHz, 32 bit RISC
Maximum print size	210 x 297 mm
Maximum ISO A-series paper size	A4
I/O ports	USB
Power requirements	200 – 240 VAC / 100 – 127 VAC 50/60 Hz
Networking features	Ethernet/Fast-Ethernet
Non-operating relative humidity (non-condensing)	10 - 85 %
Total input capacity	200 sheets
Maximum input capacity	500 sheets
Printer fonts	PostScript
Maximum duty cycle	35000 pages per month
Number of PostScript fonts	139
Power consumption (printing)	380 W
Storage temperature (T-T)	-20 - 40 °C
Operating temperature (T-T)	10 - 32 °C
Operating relative humidity (H-H)	10 - 80 %

Weight and Dimensions

Dimensions (WxDxH)	442 x 395 x 341 mm