Xerox Phaser 7300 Features Guide

Printer Features
Phaser® 7300 Color Printer 25
Front panel contrast
To make the front panel text more readable, you can adjust the contrast between the text and the
background:
1. On the front panel, with
Menus highlighted, press the OK key.
2. Scroll to
Printer Setup Menu by pressing the Up Arrow or Down Arrow key.
3. Press the OK key.
4. Scroll to
Set Front Panel Contrast.
5. Press the OK key.
6. Scroll the value until you achieve the desired contrast between the text and the background. The
values range from 1 to 10.
7. Press the OK key.
Intelligent Ready mode
Intelligent Ready mode is an automated system that monitors the printer’s usage and warms up the
printer when you are most likely to need it and puts it into Power Saver mode when you use it the least.
To turn Intelligent Ready mode on or off from the printer’s front panel:
1. With
Menus highlighted, press the OK key.
2. Scroll through the menu to
Printer Setup Menu using the Up Arrow or Down Arrow keys.
3. Press the OK key.
4. Scroll through the menu to
Intelligent Ready using the Up Arrow or Down Arrow keys.
To change the setting, press the OK key.
To select Intelligent Ready mode or schedule warmup/standby settings using CentreWare IS
software:
1. From your printer’s Internet Services home page, click Properties.
2. On the left side of the Properties page in CentreWare IS, click Warmup.
3. For Warmup Mode, select either Intelligent Ready or Scheduled (if you want to specify the
warmup/standby settings for each day).
4. If you selected Scheduled in step 3, make selections for each day’s warmup setting and standby
setting.
5. Click the Save Changes button on the bottom of the page.
Note
Although the front panel selections only enable you to turn Intelligent Ready mode on or off,
CentreWare IS enables you to specify particular printer warmup times.

Xerox Phaser 7300 Specifications

General

Brand	Xerox
Model	Phaser 7300
Category	Printer
Language	English