Troubleshooting
Xerox
®
VersaLink
®
C400 Color Printer 159
User Guide
Print-Quality Problems
This section includes:
• Controlling Print-Quality .............................................................................................................................................. 159
• Paper and Media ............................................................................................................................................................ 160
• Solving Print-Quality Problems .................................................................................................................................. 161
Your printer is designed to produce consistently high-quality prints. If you observe print-quality problems,
use the information in this section to troubleshoot the problem. For more information, go to
www.xerox.com/office/VLC400support.
CAUTION: The Xerox Warranty, Service Agreement, or Xerox Total Satisfaction Guarantee
does not cover damage caused by using unsupported paper or specialty media. The Xerox
Total Satisfaction Guarantee is available in the United States and Canada. Coverage could
vary outside these areas. Contact your local Xerox representative for details.
Notes:
• To ensure consistent print quality, the toner/print/drum cartridges for many devices are
designed to cease functioning at a predetermined point.
• Grayscale images printed with the composite black setting increment the color pages
counter, because color consumables are used. Composite black is the default setting on
most printers.
Controlling Print-Quality
Various factors can affect the quality of the output of your printer. For consistent and optimum
print quality, use paper designed for your printer, and correctly set the Print-Quality Mode and Color
Adjustments. Follow the guidelines in this section to maintain optimum print quality from your printer.
Temperature and humidity affect the quality of the printed output. The range for optimal print quality
is 15–28ºC (59–82ºF) and 20–70% relative humidity. However, print quality can be affected when
operating near the limits for both temperature and humidity.
To Next Page
Loading...
Need help?
General