Xerox WorkCentre 7220 System Administrator Guide

Security
WorkCentre 7800 Series Multifunction Printer 117
System Administrator Guide
Verifying the Software
You can test the printer software to confirm that it is operating correctly. The test checks software files
to confirm that they are not corrupt. If the printer software appears to be functioning improperly, a
Xerox representative can ask you to perform this test.
1. In CentreWare Internet Services, click Properties > Security.
2. Click Software Verification Test.
3. To begin the test, click Start test.
4. To interrupt and cancel the test, click Cancel.
Notes:
• You can continue to use the printer while the test is running.
• If the test fails, software files are corrupt. Xerox recommends that you reinstall the software.
Contact a Xerox representative for help.

Xerox WorkCentre 7220 Specifications

General

Brand	Xerox
Model	WorkCentre 7220
Category	All in One Printer
Language	English