EasyManuals Logo
Home>Xerox>All in One Printer>WorkCentre 7232

Xerox WorkCentre 7232 User Manual

Xerox WorkCentre 7232
236 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #133 background imageLoading...
Page #133 background image
E-mail Environments
Xerox WorkCentre 7232/7242 System Administration Guide 123
E-mail Environments
System Requirements
The following are required for the machine.
• Scan To E-mail Kit is required to send scanned documents as E-mail attachments.
• The machine is connected to the network using TCP/IP.
• The environment allows the sending and receiving of E-mail.
NOTE: A file may not print if the format differs from those in the above table.
NOTE: It is recommended to use Microsoft Outlook Express 5.5/6.0 or Netscape 7 as
E-mail software.
E-mail Installation
This section describes how to enable the E-mail feature.
Installation Procedure
To use the E-mail feature, configure the following settings on the machine.
Network Communication Setup
NOTE: Some of the configuration options for this protocol are only available from
CentreWare Internet Services.
NOTE: Keep the SNMP port enabled while you use the machine on the TCP/IP
network.
Initially, activate the ports for E-mail.
1. Connect the machine to the network.
Item Correspondent Specifications
ITU-T Recommendations ITU-T T.37, T.30, F.185 and E.164
E-mail forwarding RFC2304, RFC2305
DSN function RFC1891, 1894
MDN function RFC2298
SMTP receiving RFC821, 822, 1869
POP3 receiving RFC1939
MIME version Version1.0 (RFC2049)

Table of Contents

Other manuals for Xerox WorkCentre 7232

Questions and Answers:

Xerox WorkCentre 7232 Specifications

General IconGeneral
BrandXerox
ModelWorkCentre 7232
CategoryAll in One Printer
LanguageEnglish

Related product manuals