24
Paper Tray Bypass (XC820/ XC830/ XC865/ XC1020/ XC1044/
XC1250/ XC1255)
Use the Paper Tray Bypass to copy onto paper that is different from that
loaded in the paper tray and to copy onto special stock such as labels or
transparencies.
The minimum copy size is 3.5
×5.5"/ A6. The maximum copy paper size is
8.5
×14" / 216×356mm.
Predrilled paper: holes toward the front of
the copier.
Letterhead paper: face up with the top
toward the left.
Transparencies: one sheet at a time.
Labels: face up, one sheet at a time.
• Use labels and transparencies specifically
designed for copiers (high temperatures).
1. Place the original face down and align it
with the registration guide on the
document glass and close the document
cover.
XC865/ XC1044/ XC1255 copiers only
Unless the SDF auto start has been disabled,
the Paper Tray Bypass cannot be selected.
2. Adjust the bypass guide to the width of the
copy paper.
2. Insert a single sheet of copy paper into the
paper tray bypass.
• The paper will feed automatically.
• When copying continuously, insert the
next copy paper as soon as the
previous sheet has fed.
To Next Page
Loading...
Need help?
General