Xerox XC 800 Series User Manual

34
Copier Care
Cleaning the Transfer Corotron
If copies start getting streaks or blotches, the transfer corotron may be
dirty.
1. Press the release lever to open the copier.
2. Remove the green transfer corotron
cleaner from inside the copier (on the
right-hand side near the front) and insert it
into the transfer corotron unit.
2. Wipe the corotron wire with the transfer
cleaning tool as shown.
3. Replace the cleaner and close the upper
half of the copier.

Xerox XC 800 Series Specifications

General

Brand	Xerox
Model	XC 800 Series
Category	Copier
Language	English