EasyManuals Logo
Home>Xerox>Copier>XC 800 Series

Xerox XC 800 Series User Manual

Xerox XC 800 Series
59 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #43 background imageLoading...
Page #43 background image
39
Drum Cartridge Replacement
The useful life of the drum cartridge is approximately 12,000 copies. The
drum cartridge indicator on the copier diagram lights when the drum is near
the end of life. Copies can continue to be made, but you should have a
replacement cartridge in stock. After approximately 1,000 copies, the
Ready indicator will go out, the drum cartridge indicator will blink, and the
copier will stop operating until the drum cartridge is replaced.
Does not apply in some areas of Latin America.
1. Press the release lever to open the copier.
2. Press down on the green lever (1) on the
front of the toner cartridge and pull out the
cartridge (2).
Note: The toner cartridge must be removed
before removing the Drum Cartridge.
3. Pull out the drum cartridge.
Note: Help the environment by recycling
your used Drum Cartridge. Refer to the
Xerox Green Team brochure packed with the
Drum Cartridge for instructions on returning
the used Drum Cartridge to Xerox.
4. Remove the cover from the new Drum
Cartridge.
2. Slide the new Drum Cartridge in place,
making sure not to touch the surface of
the drum.
3. Reinstall the Toner Cartridge.
4. Close the copier by gently pushing down
the upper half.
1
2

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Xerox XC 800 Series and is the answer not in the manual?

Xerox XC 800 Series Specifications

General IconGeneral
BrandXerox
ModelXC 800 Series
CategoryCopier
LanguageEnglish

Related product manuals