30
Feature Program
Number
Option Number
* Factory Setting
R/E Preset: This feature allows you to
set a specific preset reduction or
enlargement setting for the
key.
(All models.)
10 70 – 141%
Default 70% *
Auto Paper Tray Switching: When
enabled, the copier will automatically
switch to another paper tray when the
selected tray runs out of paper.
(Models XC1250 and XC1255 only.)
11 0 – On
1 – Off *
Set Document Feeder Exposure
Adjustment: The copy exposure range
may be adjusted when the copy image
is consistently too light or too dark.
(Models XC865, XC1044, XC1045, and
XC1255 only.)
12 0 – +4 steps light
1 – +3 steps light
2 – +2 steps light
3 – +1 step light
4 – Normal *
5 – +1 step dark
6 – +2 steps dark
7 – +3 steps dark
8 – +4 steps dark
Note: The procedures written in this manual are based on the factory
default settings.
To Next Page
Loading...
Need help?
General