Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Xerox Travel Scanner 100 User’s Guide 57
Scanning
Skew Detection
By default, the scanner is set to detect when the item being scanned is at an angle, also called skewed. It
will stop scanning and back the item out of the scanner. You can turn this feature off or on from the
hardware properties Device Settings tab for your scanner.
To open the device settings tab:
1. Right-click on the One Touch icon and choose Show Hardware from the pop-up menu.
2. The Hardware Properties dialog box opens and shows information about your Xerox Travel Scanner
100.
3. Click the Properties button.
4. Click on Enable the detection of excessive document skew. Back out the document if this occurs.
5. Click on OK to save the changes and close the window.

Xerox XTRAVEL-SCAN - Travel Scanner 100 Specifications

General

Brand	Xerox
Model	XTRAVEL-SCAN - Travel Scanner 100
Category	Scanner
Language	English