Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Xerox Travel Scanner 100 User’s Guide 79
Appendix A Notices
Section 1: Safety Introduction
Notices and Safety
Please read the following instructions carefully before operating the machine and refer to them as needed
to ensure the continued safe operation of your machine.
Your Xerox product and supplies have been designed and tested to meet strict safety requirements. These
include safety agency evaluation and certification, and compliance with electromagnetic regulations and
established environmental standards.
The safety and environment testing and performance of this product have been verified using Xerox
materials only.
WARNING: Unauthorized alterations, which may include the addition of new functions or connection of
external devices, may impact the product certification. Please contact your Xerox representative for more
information.
Section 2: EMC
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications.
WARNING: In order to allow this equipment to operate in close proximity to Industrial, Scientific and
Medical (ISM) equipment, the external radiation from ISM equipment may have to be limited or
special mitigation measures taken.
Changes and modifications to this equipment not specifically approved by Xerox may void the user’s
authority to operate this equipment.

Xerox XTRAVEL-SCAN - Travel Scanner 100 Specifications

General

Brand	Xerox
Model	XTRAVEL-SCAN - Travel Scanner 100
Category	Scanner
Language	English