Xerox XTRAVEL-SCAN - Travel Scanner 100 User Manual

Xerox Travel Scanner 100 User’s Guide 3
Welcome
What You Need
IBM-compatible Pentium 4 PC, or AMD equivalent with:
• A DVD-ROM drive
• An available Universal Serial Bus (USB) port
•Microsoft
®
Windows
®
operating system: Windows 2000 (Service Pack 4), 32-bit Windows XP (Service
Pack 2 or 3), 32-bit or 64-bit Windows Vista
• Windows 2000 and XP: Minimum of 512 megabytes (MB) of internal memory (RAM)
Windows Vista: Minimum of 1 gigabyte (GB) of internal memory (RAM)
• 350 MB minimum of free hard disk space
A VGA or SVGA Monitor
The recommended settings for your monitor are:
• High Color (16-bit) or True Color (24-bit or 32-bit)
• Resolution set to at least 800 x 600 pixels
To set your monitor’s colors and resolution:
• Open the Windows Control Panel
• Double-click on Display then select the Settings tab
Documentation
The following documentation is provided with your scanner:
• Quick Install Guide—Abbreviated installation instructions.
• Xerox Scanner User’s Guide—On the Installation Disc; contains detailed installation, scanning,
configuration, and maintenance information.
• MiniGuides—On the Installation Disc; contains detailed instructions on using the One Touch
OmniPage module, One Touch VRS module and SharePoint destination link.
• Readme—Contains the latest information about your scanner and software installation.
• PaperPort User’s Guide—On the Installation Disc; contains detailed feature and configuration
information for the PaperPort software.
• BizCard User’s Guide—On the Installation Disc; contains detailed instructions for using the software.
• Online Help—For the scanner configuration, TWAIN and WIA interfaces, and PaperPort software
applications.

Xerox XTRAVEL-SCAN - Travel Scanner 100 Specifications

General

Brand	Xerox
Model	XTRAVEL-SCAN - Travel Scanner 100
Category	Scanner
Language	English