Xilinx LogiCORE IP Spartan-6 User Manual

36 www.xilinx.com Spartan-6 FPGA GTP Transceiver Wizard v1.8
UG546 (v1.8) December 14, 2010
Chapter 3: Running the Wizard
Channel Bonding, Clock Correction
The Channel Bonding, Clock Correction screen (page 9) of the Wizard (Figure 3-13) defines
the channel bonding and clock correction parameters. Also, the common channel bonding
sequence is defined on this page.
The Channel Bonding settings and sequence definition are common between both
transceivers of each selected pair. The protocol template option for GTP1 (Wizard Page 2)
must be set to Use GTP0 settings to enable the Channel Bonding settings.
Table 3-21, page 37 describes the common Channel Bonding settings.
X-Ref Target - Figure 3-13
Figure 3-13: Channel Bonding, Clock Correction - Page 9

Xilinx LogiCORE IP Spartan-6 Specifications

General

Brand	Xilinx
Model	LogiCORE IP Spartan-6
Category	Transceiver
Language	English