Xilinx LogiCORE IP Spartan-6 User Manual

Spartan-6 FPGA GTP Transceiver Wizard v1.8 www.xilinx.com 49
UG546 (v1.8) December 14, 2010
Directory and File Contents
<component name>/simulation
The simulation directory contains the simulation scripts provided with the core.
/simulation/functional
The functional directory contains functional simulation scripts provided with the core.
Table 5-7: Simulation Directory
Name Description
<project_dir>/<component_name>/simulation
demo_tb.v
Test bench to simulate the provided example design.
See.
Functional Simulation of the Example Design.
sim_reset_mgt_model.vhd
Reset module for VHDL required for emulating the
GSR pulse at the beginning of functional simulation
in order to correctly reset the VHDL MGT smart
model.
Back to Top
Table 5-8: Functional Directory
Name Description
<project_dir>/<component_name>/simulation/functional
simulate_isim.sh
Linux script for running simulation using ISE Simulator.
simulate_isim.bat
Windows script for running simulation using ISE Simulator.
simulate_mti.do
ModelSim simulation script.
simulate_ncsim.bat
Windows script for running simulation using Cadence IUS.
simulate_ncsim.sh
Linux script for running simulation using Cadence IUS.
simulate_vcs.sh
Linux script for running simulation using Synopsys VCS and
VCS MX.
ucli_commands.key
Script for VCS commands.
vcs_session.tcl
Script for adding GTP Wrapper signals to VCS wave viewer.
wave_isim.tcl
Script for adding GTP Wrapper signals to the ISim wave
viewer.
wave_mti.do
Script for adding GTP Wrapper signals to the ModelSim
wave viewer.
wave_ncsim.sv
Script for adding GTP Wrapper signals to the Cadence IUS
wave viewer.
Back to Top

Xilinx LogiCORE IP Spartan-6 Specifications

General

Brand	Xilinx
Model	LogiCORE IP Spartan-6
Category	Transceiver
Language	English