Xilinx Platform Cable USB II User Manual

Platform Cable USB II
DS593 (v1.2.1) March 17, 2011 www.xilinx.com
3
Physical Description
The Platform Cable USB II electronics are housed in a recyclable, fire-retardant plastic case (Figure 2). An internal EMI
shield attenuates internally generated emissions and protects against susceptibility to radiated emissions.
Operation
This section describes how to connect and use Platform Cable USB II.
Minimum Host System Requirements
The host computer must contain a USB Host Controller with one or more USB ports. The controller can reside on the PC
motherboard, or can be added using an expansion or PCMCIA card.
Platform Cable USB II is designed to take full advantage of the bandwidth of USB 2.0 ports, but it is also backward-
compatible with USB 1.1 ports. Refer to USB Hub Types and Cable Performance, page 28 for additional information on
connection environments and bandwidth.
Table 1 lists Platform Cable USB II compatibility with the Xilinx design tools.
X-Ref Target - Figure 2
Figure 2: Plastic Case Physical Description
Top View
Side View
STATUS
25.4 mm
16.5 mm
115.6 mm
53.3 mm
Made in U.S.A.
Serial XU - 12345
Model DLC10
Platform Cable USB II
Power 5V 0.15A
2mm
CONNECTOR
SIGNALS
RoHS
Compliant
VREF
PROG
CCLK
DONE
DIN
INIT
----
oror Serial
1.5 < VREF < 5.0 VDC
VREFVREF
SSTMS
SCKTCK
MISOTDO
MOSITDI
--------
SPIJTAG
WPHALT
Gnd
Gnd
Gnd
Gnd
Gnd
----
PGND
DS593_02_021908
HI-SPEED
CERTIFIED
USB
®

Xilinx Platform Cable USB II Specifications

General

Brand	Xilinx
Model	Platform Cable USB II
Category	Motherboard
Language	English