Xilinx Platform Cable USB II User Manual

Platform Cable USB II
DS593 (v1.2.1) March 17, 2011 www.xilinx.com
33
USB-IF Compliance
Platform Cable USB II is certified by the USB Integrators Forum (USB-IF). Certification is achieved when a product passes
a battery of tests required by the USB-IF Compliance Program. These tests (performed at an independent test facility)
measure a product's conformity with Universal Serial Bus Specification Revision 2.0 and establish a reasonable level of
T
TSU
Target Setup Time
(TDI or TMS relative to the
positive edge of TCK)
V
REF
= 1.5V to 3.3V 4.8 ns
T
CSU
Cable Setup Time
(TDO relative to the
negative edge of TCK)
V
REF
= 1.5V to 3.3V 15.8 ns
T
TPD
Target Propagation Delay Time
(TDO relative to the
negative edge of TCK)
V
REF
= 1.5V to 3.3V 24.6 ns
X-Ref Target - Figure 31
Notes:
1. All times are in nanoseconds and are relative to the target system interface connector.
2. T
TSU
Min is the minimum setup time guaranteed by Platform Cable USB II relative to the positive edge of TCK_CCLK_SCK.
3. T
CSU
Min is the minimum setup required by Platform Cable USB II to properly sample TDO_DONE_MISO.
4. Propagation delays associated with buffers on the target system must be taken into account to satisfy the minimum setup times.
Figure 31: Platform Cable USB II Timing Diagram
Tabl e 1 0 : Switching Characteristics
Symbol Description Conditions Min Max Units
Target devices samples TMS_PROG_SS and
TDI_DIN_MOSI on the rising edge of TCK_CCLK_SCK
T
CLK
T
TSU
T
CPD
TCK_CCLK_SCK
TMS_PROG_SS /
TDI_DIN_MOSI
TDO_DONE_MISO
Platform Cable USB II asserts
TMS_PROG_SS and
TDI_DIN_MOSI on the falling
edge of TCK_CCLK_SCK
T
TPD
Platform Cable USB II samples TDO_DONE_MISO
on the falling edge of TCK_CCLK_SCK
T
CSU
Target device asserts TDO_DONE_MISO
on the falling edge of TCK_CCLK_SCK
DS593_31_021408

Xilinx Platform Cable USB II Specifications

General

Brand	Xilinx
Model	Platform Cable USB II
Category	Motherboard
Language	English