21
5） Prevent from oil and water
Install a protective cover over the servo
motor if it is used in a location that is subject
to water or oil mist. Also use a servo motor
with an oil seal when needed to seal the
through-shaft section.
6） Cable stress
Make sure that the power lines are free from bends and tension. Be especially careful to wire
signal line cables so that they are not subject to stress because the core wires are very thin,
measuring only 0.2 to 0.3mm
2
.
3. Product dimensions
3-1. Servo motor
40 series servo motor dimension Unit: mm
Through part
of the shaft
To Next Page
Loading...
Need help?
General
