Preparing the Remote C
on
t
r
o
l
Inserting
the
B
a
tt
e
r
y
1.First push to inside as the direction indicated by the arrow (See 1 ) and then
Remove the battery holder as the direction indicated by the arrow (See
2
).
2.Replace the battery Set a new battery property with (+)side up as illustrated
(See
3
).
3.Insert the battery holder. Push in the holder to the original position (See
4
).
Using the Remote C
on
t
r
o
l
Face the remote control towards the player front face IR mark (remote control signal
receiver).
Changing of the view angle on multi-angle Digital Video media.
Operation angle: About 30 degree in each the direction of the front of the IR mark.
Note
:
The lithium cell in the battery compartment of remote control has been secured for
transport with a plastic . Before initial use please remove this plastic so that the
remote control is ready for operation .
To Next Page
Loading...
Need help?
General
