Xtool D7 User Manual

15
4. DIAGNOSTIC
The diagnostic application can read ECU information, read and clear
DTC and check living data and freeze frames. The Diagnostic
application can access the electronic control unit (ECU) of various
vehicle control systems, including the engine, transmission, anti-lock
braking system (ABS), airbag system (SRS), and perform kinds of
actuation tests.
VEHICLE CONNECTION
The Diagnostic operation needs to connect the D7 smart Diagnostic
system to a vehicle first so that the tablet can establish correct vehicle
communication. Please perform the following steps:
1 Turn on the tablet;
2 Connect cables and tablet in the following order: ①→②→③;
3 Switch on the ignition and tap on the Diagnostic application to test
vehicles.
The connection method is shown in the figure below:
Fig 4-1 How to connect to vehicle

Xtool D7 Specifications

General

Tab	ble 1-1 Specification
Item	Description
Operating System	Android
Processor	Quad-core 1.6GHz Processor
Sensors	Gravity sensor, light sensor
Memory	32GB
Display	7.0-inch touch screen with 1024 × 600 resolution
Connectivity	 USB  Wi-Fi
Auto Input/Output	Microphone, dual speakers, 4-band 3.5mm stereo/standard headset jack
Power and Battery	4000mAh, 3.7V lithium-polymer battery
Power Voltage	5V
Power Consumption	8W
Operating Temperature	-20 to 60℃(-4 to 140℉)
Storage Temperature	-40 to 70℃(-40 to 158℉)
Humidity	<90%

Weight and Dimensions

Dimension (LWH)	21815029mm