Xtool D7 User Manual

50
5. Press the accelerator pedal down and hold it until a message of ‘The
learning is successful, please release the accelerator pedal.’ pops
up.
6. Release the accelerator pedal and press OK to exit the gear learning
function.
6. SETTINGS
Click the Settings button to adjust the default settings and view information
about the D7 Smart Diagnostic System. There are seven options available
in the system settings:
⚫ Language
⚫ Units
⚫ My Workshop Info
⚫ VCI Info
⚫ About
LANGUAGE
The languages supported by this device are listed in Settings. In areas
outside the English area, the default language is English and the local
official language. Users can switch between English and local official
languages on the device by themselves. If you need to switch other
languages, please contact the dealer to unbind the current language
configuration and rebind it to the language configuration you need to switch.
After the configuration is successfully changed, you can switch the target
language.

Xtool D7 Specifications

General

Tab	ble 1-1 Specification
Item	Description
Operating System	Android
Processor	Quad-core 1.6GHz Processor
Sensors	Gravity sensor, light sensor
Memory	32GB
Display	7.0-inch touch screen with 1024 × 600 resolution
Connectivity	 USB  Wi-Fi
Auto Input/Output	Microphone, dual speakers, 4-band 3.5mm stereo/standard headset jack
Power and Battery	4000mAh, 3.7V lithium-polymer battery
Power Voltage	5V
Power Consumption	8W
Operating Temperature	-20 to 60℃(-4 to 140℉)
Storage Temperature	-40 to 70℃(-40 to 158℉)
Humidity	<90%

Weight and Dimensions

Dimension (LWH)	21815029mm