Xtool D7 User Manual

31
3. Enter Maintenance mileage reset menu.
4. Input reasonable value of mileage and press OK.
Figure 5-3 Sample of oil reset function (screen 2)
5. Message of ‘Reset success’ displayed when Oil Reset function has
successfully performed.
5.2 EPB
Electronic Parking Brake (EPB) System reset is a popular special function.
You can use this function to reset the electronic parking brake system and
brake pads, which also supports the brake pad replacement (retraction,
release of the brake pump), G-sensor, and body angle calibration. This
function has multiple uses and can safely and effectively maintain the
electronic brake system. These applications include deactivating and
activating brake control systems, assisting in controlling brake fluid, opening
and closing brake pads, setting brakes after replacing brake discs or brake
pads, etc.
1. If the brake pad wears the brake pad sense line, the brake pad sense
line will send a signal to the onboard tablet asking for replacing the
brake pad. After replacing the brake pad, you must reset the brake pad.
Otherwise, the car alarms.

Xtool D7 Specifications

General

Tab	ble 1-1 Specification
Item	Description
Operating System	Android
Processor	Quad-core 1.6GHz Processor
Sensors	Gravity sensor, light sensor
Memory	32GB
Display	7.0-inch touch screen with 1024 × 600 resolution
Connectivity	 USB  Wi-Fi
Auto Input/Output	Microphone, dual speakers, 4-band 3.5mm stereo/standard headset jack
Power and Battery	4000mAh, 3.7V lithium-polymer battery
Power Voltage	5V
Power Consumption	8W
Operating Temperature	-20 to 60℃(-4 to 140℉)
Storage Temperature	-40 to 70℃(-40 to 158℉)
Humidity	<90%

Weight and Dimensions

Dimension (LWH)	21815029mm