Since restoring the factory settings will erase the user information on your
device, you need to enter the email again to activate your device
3 U
PDATE
After activating the device, please update the software in "Update" first.
The device will pull all currently supported software packages, and you
can download them as needed. ALL software updates directly via the
Internet. To access the update application, open the Diagnostic
application and click UPDATE, shown as below:
Fig 3-1 Update all software
※
Note: After contacting your dealer to change the language configuration,
you need to download all the software packages on the device again
To Next Page
Loading...
Need help?
General
