Xtool IP616 User Manual

50
‘The learning is successful, please release the accelerator pedal.’
pops up.
6. Release the accelerator pedal and press OK to exit the gear learning
function.
6 SETTINGS
Click the Settings button to adjust the default settings and view
information about the IP616 Smart Diagnostic System. There are seven
options available in the system settings:
 Language
 Units
 My Workshop Info
 VCI Info
 About
LANGUAGE
The languages supported by this device are listed in Settings. In areas
outside the English area, the default language is English and the local
official language. Users can switch between English and local official
languages on the device by themselves. If you need to switch other
languages, please contact the dealer to unbind the current language
configuration and rebind it to the language configuration you need to
switch. After the configuration is successfully changed, you can switch the
target language.

Xtool IP616 Specifications

General

Brand	Xtool
Model	IP616
Category	Diagnostic Equipment
Language	English