Xylem WTW OxiTop-IDS Multi 3630 IDS User Manual

Operation with OxiTop
®
-IDS measuring heads Multi 3630/3620 IDS
24 ba77045d02 03/2020
Check and, if necessary, change the settings in the Settings menu.
 Measuring range
 Bottle volume
 Sample volume
 Dilution 1 +
Quit the Settings menu with <ESC>.
14
Using <F1>/[Meas. head] start the assignment of a OxiTop
®
-IDS mea-
suring head to the current sample.
15
Follow the instructions on the display.
Press the <> key of the OxiTop
®
-IDS measuring head (right-hand
key) and keep it depressed until the LED flashes green.
When the OxiTop
®
-IDS measuring head has been identified by the
meter, the following data of the head are displayed:
 ID (assigned at the measuring head)
 Series number of the OxiTop
®
-IDS measuring head
 GLP (if there is a valid calibration).
1 ID of the OxiTop
®
-IDS measuring head
(entered at the OxiTop
®
-IDS measuring head)
2 Series number of the OxiTop
®
-IDS measuring head
3 GLP (if there is a valid calibration).
16
Using Accept measuring head, confirm the assignment of the OxiTop
®
-
IDS measuring head.
or
Using Reject measuring head, cancel the assignment of the OxiTop
®
-
IDS measuring head.
The Set menu is open.
When the measuring head is accepted, the date and time of the
meter are automatically transferred to the measuring head.
38 12345678 GLP
Reject measuring head
Accept measuring head
Meas. head
15.03.2020 08:00
2
1
3

Xylem WTW OxiTop-IDS Multi 3630 IDS Specifications

General

Brand	Xylem
Model	WTW OxiTop-IDS Multi 3630 IDS
Category	Measuring Instruments
Language	English