Yaesu FT-8800R User Manual

MENU (SET) MODE
Yaesu FT-8800R Operating Manual (courtesy of W5JCK) Page 80 of 83
Menu b 36 SHIFT
Function: Sets the magnitude of the Repeater Shift.
Values:
0.00 – 99.95 MHz (50 kHz step)
Default:
Depends on the band of operation.
 The value for this Menu Item is to be applied separately to each Operating
Band / Mode.
Menu b 37 SKP.MSM
Function:
Selects what action will happen on a flagged Memory Channel.
See Scan in Memory Mode on page 49 for details.
Values:
OFF, SKIP, MSM
OFF
All memory channels will be scanned (the flag will be ignored).
SKIP
The scanner will skip the flagged (Skip) channels during scanning.
MSM
The scanner will only scan the flagged (Preferential) channels during
scanning.
Default:
OFF
 The value for this Menu Item is to be applied separately to each Operating
Band / Mode.
Menu b 38 STEP
Function:
Sets the Synthesizer steps.
See Select the Channel Step on page 22 for details.
Values:
5.0k, 10.0k, 12.5k, 15.0k, 20.0k, 25.0k, 50.0k
Default:
Depends on the band of operation.
 The value for this Menu Item is to be applied separately to each Operating
Band / Mode.

Yaesu FT-8800R Specifications

General

Brand	Yaesu
Model	FT-8800R
Category	Transceiver
Language	English