Yaesu FTDX10 User Manual

71
• Check Memory Channel Status
Before programming a memory channel, the
current contents of that channel may be veried
without the danger of over-writing the channel.
1. Press the [M] key.
The memory channel list will be displayed.
2. From the channel list, touch and select the
memory channel and check, or change the
operation mode.
Alternately, the memory channel may be se-
lected by rotating the [FUNC] knob.
● Press the [FUNC] knob to enter memory
mode on the selected channel.
3. To change the operation mode, touch [MODE],
rotate the [FUNC] knob to select the mode
then press the [FUNC] knob.
● The operating mode may also be changed
by pressing the [FUNC] knob for 1 sec-
ond, then rotate the [FUNC] knob to select
[MODE], press the [FUNC] knob, select the
operation mode with the [FUNC] knob, and
then press the [FUNC] knob.
After changing the operation mode, touch
[BACK] or rotate the [FUNC] knob to select
[BACK] and press the [FUNC] knob to re-
turn to the state of step 1.
4. Touch [BACK] or press the [M] key to return
to the previous screen.
• Labeling Memories
Alphanumeric labels (“Tags”) may be appended to
memory channels, to aid in recollection of the chan-
nel’s use (such as a club name, a location etc.).
1. Press the [M] key.
The memory channel list is displayed.
2. From the channel list, touch and select the
desired memory channel.
Alternately, the memory channel may be se-
lected by rotating the [FUNC] knob.
3. Touch [NAME] area on the screen.
The character input screen will be displayed.
● The character input screen may also be
displayed by pressing the [FUNC] knob for
1 second, then, rotate the [FUNC] knob to
select [NAME], and then press the [FUNC]
knob.
4. Touch a character key on the display to enter
the letters, numbers, or symbols of the de-
sired label.
Up to 12 characters may be used in the cre-
ation of a label.
5. Touch [ENT] .
If the character input screen is displayed by
a long press of the [FUNC] knob in step 3,
touch [BACK] or rotate the [FUNC] knob to
select [BACK] and press the [FUNC] knob
to return to the state of step 1.
To add a label to another memory, repeat
steps 2 to 5 above.
6. Touch [BACK] or press the [M] key to save
the new settings and return to normal opera-
tion.

Yaesu FTDX10 Specifications

General

Brand	Yaesu
Model	FTDX10
Category	Transceiver
Language	English