To Next Page

To Previous Page

115

Receiver

Circuit Type: Double Superheterodyne

Intermediate Frequencies: 1st 9.005MHz

2nd 24kHz

Sensitivity (typ): SSB/CW (2.4kHz, 10dB S+N/N)

1.8MHz - 30MHz 0.16µV (AMP2 “ON”)

50MHz - 54MHz 0.125µV (AMP2 “ON”)

70MHz - 70.5MHz 0.16µV (AMP2 “ON”)

AM (BW: 6kHz, 10dB S+N/N, 30% modulation @400Hz)

0.5MHz - 1.8MHz 7.9µV

1.8MHz - 30MHz 2µV (AMP2 “ON”)

50MHz - 54MHz 1µV (AMP2 “ON”)

70MHz - 70.5MHz 2µV (AMP2 “ON”)

FM (1kHz 3.5kHz DEV BW: 12kHz, 12dB SINAD)

28MHz - 30MHz 0.25µV (AMP2 “ON”)

50MHz - 54MHz 0.2µV (AMP2 “ON”)

70MHz - 70.5MHz 0.25µV (AMP2 “ON”)

Selectivity (typ): Mode –6dB –60dB

CW (BW=0.5kHz) 0.5kHz or better 0.75kHz or less

SSB (BW=2.4kHz) 2.4kHz or better 3.6kHz or less

AM (BW=6kHz) 6kHz or better 15kHz or less

FM (BW=12kHz) 12kHz or better 25kHz or less

Image Rejection: 70dB or better (1.8MHz - 28MHz Amateur bands)

60dB or better (50MHz Amateur band)

60dB or better (70MHz UK Amateur band)

Maximum Audio Output: 2.5W into 4Ω with 10% THD

Audio Output Impedance: 4 to 16Ω (4Ω: nominal)

Conducted Radiation: Less than 4nW

Specications are subject to change, in the interest of technical improvement, without notice or

obligation, and are guaranteed only within the amateur bands.

Yaesu FTDX10 User Manual

Other manuals for Yaesu FTDX10