VR-500 OPERATING MANUAL34
The Smart Search
TM
feature has 31 channels available as a default channel capacity. Sev-
eral other channel capacity values are available, using the Menu system:
•
Set the radio to the VFO mode by pressing the [CLR(P.SET)] key, if necessary.
‚
Press the [ENT(SET)] key while pressing the [FUNC] key to activate the “Set” (Menu)
mode.
ƒ
Rotate the DIAL knob to select Menu #2 [Smart Search].
„
Rotate the DIAL while holding in the [FUNC] key to review
the number of channels allocated for Smart Search operation.
You may select 11, 21, 31, or 41 channels.
…
When you have made your selection, press the [CLR(P.SET)] key to exit to normal
operation.
Smart Search
TM
To Next Page
Loading...
Need help?
General
