Smart key system (GDR155-A)
4-5
4
EAU76470
Smart key
To turn the smart key on or off
Push and hold the smart key button for
approximately 1 second to turn the
smart key on or off. When the smart
key is turned off, the vehicle cannot be
operated even if the smart key is within
operating range. To operate the vehi-
cle, turn the smart key on and bring it
within operating range. (See Operat-
ing range of the smart key system.)
To check whether the smart key is
turned on or off
Push the smart key button to confirm
the current operating status of the
smart key.
If the smart key indicator light:
Short flash (0.1 seconds): The
smart key is turned on.
Long flash (0.5 seconds): The
smart key is turned off.
Remote answer-back function
Push the smart key button to operate
the answer-back function remotely.
The beeper will sound twice and all of
the turn signal lights will flash twice.
This feature is convenient for locating
your vehicle in a parking lot and other
areas.
To turn the answer-back beeper on
or off
The beeper, which sounds when the
answer-back function is operated, can
be turned on or off according to the fol-
lowing procedure.
1. Turn the smart key on and bring it
within operating range.
2. Turn the main switch to “OFF”,
and then push the main switch
knob once.
3. Within 9 seconds of pushing the
knob, push and hold the knob
again for 5 seconds.
4. When the beeper sounds, the set-
ting is complete.
If the beeper:
Sounds twice: The beeper is
turned off.
Sounds once: The beeper is
turned on.
1. Smart key indicator light
2. Smart key button
UBF6EYE0.book Page 5 Friday, July 14, 2017 3:39 PM
To Next Page
Loading...
Need help?
General