8-50
8
2. Lower the ATV to the ground.
3. Tighten the wheel nuts to the specified
torques.
EBU25710
Troubleshooting
Although Yamaha ATVs receive a thorough in-
spection before shipment from the factory, trouble
may occur during operation. Any problem in the fu-
el, compression, or ignition systems, for example,
can cause poor starting and loss of power.
The following troubleshooting chart represents a
quick and easy procedure for checking these vital
systems yourself. However, should your ATV re-
quire any repair, take it to a Yamaha dealer, whose
skilled technicians have the necessary tools, expe-
rience, and know-how to service the ATV properly.
Use only genuine Yamaha replacement parts. Im-
itation parts may look like Yamaha parts, but they
are often inferior, have a shorter service life and
can lead to expensive repair bills.
WARNING
EWB02260
1. Tapered nut
Tightening torques:
Front wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
Rear wheel nut:
55 Nm (5.5 m·kgf, 40 ft·lbf)
POTENTIAL HAZARD
Checking the fuel system while smoking or
near an open flame.
WHAT CAN HAPPEN
Fuel can ignite or explode, causing severe
injury or property damage.
U4S110E0.book Page 50 Friday, August 4, 2006 4:03 PM
To Next Page
Loading...
Need help?
General
