Operation
65
6. Slowly lower the outboard motor to the
normal position.
EMU32862
Power tilt models
The outboard motor can be tilted up partially
to allow operation in shallow water.
ECM00261
Do not tilt the outboard motor up so that
the cooling water inlet on the lower unit is
above the surface of the water when set-
ting up for and cruising in shallow water.
Otherwise severe damage from overheat-
ing can result.
EMU32943
Procedure for power tilt models
1. Place the remote control lever / gear
shift lever in neutral.
2. Slightly tilt the outboard motor up to the
desired position using the power tilt
switch. WARNING! Using the power
tilt switch on the bottom cowling
while the boat is moving or engine is
on could increase the risk of falling
overboard and could distract the op-
erator, increasing the risk of collision
with another boat or an obstacle.
[EWM01961]
3. To return the outboard motor to the nor-
UP
ZMU01935
6AG-9-3D-1E0.book 65 ページ ２０１５年１１月５日 木曜日 午前１１時７分
To Next Page
Loading...
Need help?
General
